Gas Fire Pit Flame Too Low
Why is my gas fire pit flame so low? Whether you're using a fireplace burner or a fire pit burner, there are holes in the top of it that release the gas you're utilizing for your setup. Too much fire media, whether that's fire glass, lava rock, or another medium, on top of the burner can restrict flame height. Step 1 - Remove Fire Pit Lava Rock. To access the gas pipes, remove the lava rock in your fire pit that covers these pipes. Step 2 - Clean Gas Pipes. Use an air compressor to blow out dust, ash, or debris in the fire pit gas pipes. Step 3 - Adjust Your Flame Adjustment Valve. Step 4 - Increase Gas Tank Pressure. Click to see full answer
![Gas Fireplace Flame Adjustment [5 Easy Steps]](https://fireplacehubs.com/wp-content/uploads/2021/06/gas-fireplace-flame-adjustment.png)


Why Does Low Flame Happen? Low flame issues are common with any kind of propane stove or grill because of the safety mechanism in each regulator. Regulators are designed with a special mechanism to limit gas flow in the event of a leak. Here's the idea. If a gas fire pit is pulling 90,000 BTU (which is normal) then the valve is allowing more gas vapor through to the burner than the liquid can change into gas. If the flames are no pulling too hard then at some point the gas vapors will diminish and flames may drop from burning 8″ tall to burning 2″ tall.
![Gas Fireplace Flame Too Low [5 Easy Solutions]](https://fireplacehubs.com/wp-content/uploads/2021/06/Low-flame-gas-fireplace-min.png)


The flame probably is low not due to the many reasons listed in the other answers. It is due to a faulty valve motor. There is a small servo motor that adkusts your flame valve. You will see the wires coming from the control center to a small black one inch circle at the front of the valve system. Fixing a gas fire pit doesn't need to be complicated. Follow these simple directions to troubleshoot your gas fire pit. For more information about fire pits,
To adjust a gas fireplace's flame color, follow these steps. 1. Find the Gas Log Control Knob Light the gas logs by turning on the pilot knob. Allow it a couple of minutes while monitoring the color of the flames. If when it's first turned on, the flames are mostly blue, that's normal. If the gas pressure is too high or too low, then it will cause performance issues. Gas Fire Pit Trouble Shooting 101 - Typical Fire Pit Gas Supply Pressures: Always check manufacturers specifications. Natural Gas Fire Pit: Supply Pressure: Minimum: 6.0 inches W.C.; Maximum: 7.0 inches W.C. LP Gas: Supply Pressure: Minimum: 8.0 inches W.C.;














Why Does Low Flame Happen? Low flame issues are common with any kind of propane stove or grill because of the safety mechanism in each regulator. Regulators are designed with a special mechanism to limit gas flow in the event of a leak. Here's the idea.. If a gas fire pit is pulling 90,000 BTU (which is normal) then the valve is allowing more gas vapor through to the burner than the liquid can change into gas. If the flames are no pulling too hard then at some point the gas vapors will diminish and flames may drop from burning 8″ tall to burning 2″ tall.